Nadamoo YHD-5100 (also identified as model ) is a wireless 1D laser barcode scanner designed for "plug-and-play" use with Windows, Mac, and Linux systems. Quick Setup Guide For most users, the scanner is pre-paired with its receiver and ready to use out of the box: Back Yard Preview : Plug the blue USB receiver into your computer's USB port. : Open a text field (like Notepad or Microsoft Word) and place your cursor there. : Aim at a product barcode and pull the trigger. If the numbers appear on your screen, the setup is successful. Back Yard Preview Device Specifications Connectivity : 2.4GHz wireless (via USB dongle) and wired USB cable modes. Transmission Range : Up to 328 feet (100m) indoors and 400m outdoors. Performance : 32-bit ARM microprocessor capable of 300 scans per second. : 5V/500mA charging supply with a working current of 15-40mA. deprint.hu Essential Manual Resources If you need to adjust specific settings (like adding a prefix/suffix or changing the scanning mode), refer to these documentation sources: Official PDF Guide Nadamoo Scanner Manual provides a quick guide for initial pairing and basic operation. Comprehensive Settings : A detailed User Manual on Scribd includes FAQs, troubleshooting, and optional function barcodes for advanced configuration. Support & Brand Info : Additional resources and brand-specific details can be found at the Nadamoo Manuals Plus page Common Troubleshooting
The NadaMoo YHD-5100 (also known as the Bur3003 ) is a high-performance 433MHz wireless barcode scanner designed for retail, warehouse, and office environments . This plug-and-play device offers significant wireless range—up to 400 meters (1,312 feet) in open air—and robust internal storage for offline data collection. Quick Setup Guide For most users, the YHD-5100 works immediately out of the box with no driver installation required. Hardware Connection : Plug the USB receiver into an available port on your computer or POS system. Power On : Press the trigger button. You will hear a beep and see the LED light turn on. Test : Open a text editor like Notepad or Microsoft Word , place your cursor in the document, and scan a barcode. The data should appear instantly where your cursor was. Key Technical Specifications Nadamoo-Scanner-Manual.pdf - Backyard Preview Quick Guide: (The scanner has been paired with the receiver, and set up already) 1. Plug the blue USB receiver into your computer, Back Yard Preview POSGuys How To: Set Up A Barcode Scanner
NADAMOO YHD-5100 is a wireless 1D barcode scanner (often referred to as the model) designed for plug-and-play use. Since you're looking for a "paper" version of the manual, here is a consolidated guide you can print or reference. 1. Initial Setup The scanner is typically paired with its USB receiver from the factory. To start: : Plug the blue USB receiver into a computer or laptop. : Open a program like Microsoft Word and place your cursor in the typing area. : Point the scanner at any product barcode. If the number appears at the cursor, it is working. Back Yard Preview 2. Working Modes You can switch between two primary operational modes: Instant Upload : Barcode data is sent immediately to the connected device. Success Tone: Single "Di". Failure Tone: Three "Di-Di-Di" beeps. Storage Mode : Data is saved to internal memory if you are out of wireless range. Success Tone: Upload Data: "Upload Data" barcode from your manual to send all stored entries at once. 3. Pairing & Connection If the scanner loses connection, follow these steps to re-pair it: : Press the trigger button. Pairing Mode : Scan the barcode. The blue light will flash quickly. : Re-insert the USB receiver into your port. A single beep within 3 seconds indicates success. device.report 4. Troubleshooting Tips How To Program The Nadamoo Wireless Barcode Reader
NADAMOO YHD-5100 is a handheld 1D wireless barcode scanner designed for long-range transmission and inventory management. Operating on a 433MHz frequency , it offers superior signal strength compared to standard 2.4GHz models, reaching up to 400m in open areas. Quick Setup Guide is largely a plug-and-play Connect the Receiver : Plug the USB dongle into your computer's USB port. Verify Connection : Open a text editor (like Notepad or Word) and place the cursor in the field. Scan a Sample : Scan any 1D barcode. If the numbers appear at the cursor's location, the scanner is successfully paired. : Connect the provided USB cable to the scanner and a 5V power source for 3–4 hours to reach a full charge. Core Operating Modes The manual typically identifies two primary ways to handle data transmission: Instant Upload Mode : Scanned data is sent directly to the host computer in real-time. Storage Mode : Useful for working out of range. The scanner can store up to 100,000 barcodes in its internal memory. To retrieve data, you must scan the "Upload Data" barcode found in the Nadamoo User Manual Key Technical Specifications Specification Scanning Type Bi-directional 1D Red Laser (650nm) Transmission Range 100m (Indoors) / 400m (Outdoors) Battery Life 7 to 10 days of daily use (approx. 20 hours continuous) Decoding Speed 260 scans per second Compatibility Windows, Mac, and Linux systems Troubleshooting Tips Nadamoo-Scanner-Manual.pdf - Backyard Preview Quick Guide: (The scanner has been paired with the receiver, and set up already) 1. Plug the blue USB receiver into your computer, Back Yard Preview Nadamoo-Scanner-Manual.pdf - Backyard Preview Quick Guide: (The scanner has been paired with the receiver, and set up already) 1. Plug the blue USB receiver into your computer, Back Yard Preview YHD-5100 Bar Code Scanner Hand Held by NADAMOO nadamoo barcode scanner yhd-5100 manual
0;faa;0;2cb; 0;d7;0;f1; 0;88;0;98; 0;279;0;17a; 0;1152;0;b19; 18;write_to_target_document1a;_QWruaZDjC8mE7M8PkLPKkAI_10;56; 18;write_to_target_document7;default0;1e1; 18;write_to_target_document1a;_QWruaZDjC8mE7M8PkLPKkAI_20;56; 0;f0c;0;77e; The Nadamoo YHD-5100 0;bb0;0;938; is a wireless barcode scanner commonly used for inventory management and e-commerce. It supports both 2.4GHz wireless (via a USB dongle) and wired USB modes. 0;16; 0;92;0;a3; 18;write_to_target_document7;default0;12a4;18;write_to_target_document1a;_QWruaZDjC8mE7M8PkLPKkAI_20;baf;0;6c5; Quick Setup Guide 0;16; For most users, the scanner is paired with its receiver by default. 0;16; 0;287;0;434; Connect: Plug the USB receiver into your computer's USB port. Test: Open a text editor (like Notepad or Word) and place the cursor in the field0;9d9;. Scan: Scan any product barcode. If the data appears at the cursor, the device is working. 0;2a; 18;write_to_target_document7;default0;37b8;0;37b8;18;write_to_target_document1a;_QWruaZDjC8mE7M8PkLPKkAI_20;a5; Pairing Instructions 0;16; If the scanner and receiver lose connection, follow these steps to re-pair: 0;16; Enter Wireless Mode: Scan the "2.4GHz Wireless Mode" barcode from the manual. Initiate Pairing:0;408; Unplug the receiver, then scan the "Match" (or "Pairing") barcode. The scanner will beep or flash lights to indicate pairing mode. Complete Pairing: Plug the receiver back into the computer within 30 seconds . The scanner will beep once to confirm a successful match.0;776; 0;2a; 18;write_to_target_document7;default0;10d;0;12a4;18;write_to_target_document1a;_QWruaZDjC8mE7M8PkLPKkAI_20;20e; Working Modes 0;16; 0;35f;0;40a; Instant Upload Mode: Data is sent immediately to the computer as you scan. Storage Mode (Inventory Mode): 0;ae6; Barcodes are saved to the internal memory instead of being sent immediately. To send the stored data later, you must scan the "Upload Data" barcode. Wired Mode: Simply connect the scanner via its USB cable; it will automatically prioritize wired transmission and charge the battery. 0;2a; 18;write_to_target_document7;default0;12a4;18;write_to_target_document1a;_QWruaZDjC8mE7M8PkLPKkAI_20;205; Common Troubleshooting 0;16; Not Scanning/No Data: Ensure the scanner is charged (the red light turns off when full). Check if it is accidentally in Storage Mode . Reset to Factory Defaults:0;ab6; If settings become corrupted, scan the "Restore Defaults" barcode to return to original factory settings. Battery Low: If the red indicator flashes three times, the battery is low and needs immediate charging. 18;write_to_target_document7;default0;12a4;18;write_to_target_document1a;_QWruaZDjC8mE7M8PkLPKkAI_20;2a; 18;write_to_target_document7;default18;write_to_target_document1a;_QWruaZDjC8mE7M8PkLPKkAI_20;4d73;0;4e73; 18;write_to_target_document7;default0;a1;0;a1;18;write_to_target_document1a;_QWruaZDjC8mE7M8PkLPKkAI_20;a5; 0;f5;0;195; 18;write_to_target_document1b;_QWruaZDjC8mE7M8PkLPKkAI_100;57; 0;a6a;0;5e9; 0;11c5;0;22ad; User Manual - FCC Report
Nadamoo YHD-5100 Barcode Scanner – User Manual (Draft) 1. Introduction Thank you for purchasing the Nadamoo YHD-5100 Barcode Scanner . Designed for retail, warehouse, and inventory management, the YHD-5100 offers high-speed decoding, plug‑and‑play simplicity, and durable construction. This manual covers installation, daily use, programming, and basic troubleshooting. 2. Important Safety Information
Power source: Use only the supplied USB cable or a certified 5V DC power adapter. Avoid moisture: Do not expose the scanner to rain, liquids, or high humidity. Temperature: Operate between 0°C and 40°C (32°F – 104°F). Store between -20°C and 60°C (-4°F – 140°F). Cleaning: Wipe the reading window with a soft, dry cloth. Do not use abrasive or solvent-based cleaners. No disassembly: Opening the device voids the warranty and may cause electrical hazard. Nadamoo YHD-5100 (also identified as model ) is
3. Package Contents
Nadamoo YHD-5100 Barcode Scanner (1 unit) USB interface cable (1.5m / 5ft) Quick start guide (Optional) Stand / holder
If any item is missing or damaged, contact your reseller immediately. 4. Scanner Overview | Component | Description | |-----------|-------------| | Reading window | Laser / CMOS imaging lens | | Trigger button | Press to activate scan | | LED indicator | Red = power / standby; Green = successful decode | | Beeper | Audible tone on successful scan | | USB port (Type‑A or Type‑C) | Connects to host device | Illustration reference: See Figure 1 in printed manual. 5. Hardware Installation : Aim at a product barcode and pull the trigger
Plug the USB cable into the scanner’s port. Connect the other end to an available USB port on your computer or POS terminal. The system automatically detects the scanner as a HID keyboard (no driver installation needed for Windows, macOS, or Linux). The LED will flash once and then remain dim red – ready to scan.
6. Basic Operation Scanning Barcodes