Icom M700 Mods Exclusive -

: Standard jumpers typically limit the radio to ~23 MHz. Reaching the 10-meter band (28 MHz) usually requires more complex modifications to the band-pass filters and oscillators.

Note: This mod also increases power slightly on some bands – ensure you have a good dummy load and SWR meter. icom m700 mods

: Adding a speech processor to improve transmit audio punch for amateur use. Microphone Replacement : Because the original HM28 microphone is discontinued, a modification procedure exists to adapt the microphone, involving internal board unsoldering. Digital Modes : Standard jumpers typically limit the radio to ~23 MHz

The receiver uses a de-emphasis circuit (a simple RC filter) that kills treble. By changing a few capacitor values, you can get a much flatter, more pleasant audio response. : Adding a speech processor to improve transmit

: Internal controls like R19 on the RF board and R247 on the Main board can be used to adjust the tuning power output (standard is 10W) to better match external antenna tuners. Maintenance for Aging Units