| Pin | Signal | Description | |-----|----------------|----------------------------------------------------| | 1 | B+ (Logic Power)| +48V (switched via keyswitch) | | 2 | B- (Logic GND) | Ground for logic circuits | | 3 | Throttle Wiper | 0-5V analog input from accelerator pedal | | 5 | Interlock | Seat switch or operator presence (must be high) | | 8 | Encoder A | Motor speed feedback (differential) | | 9 | Encoder B | Motor speed feedback | | 14 | CAN-H | CANbus high (500kbps typical) | | 15 | CAN-L | CANbus low | | 21 | Main Contactor | Coil driver output (low side) | | 28 | Status LED | Blink code output for diagnostics |
Always install a properly rated main fuse in the B+ line. curtis 1520 controller manual
Before installing, users should perform resistance checks on motor windings and solenoids to avoid voiding the warranty. Curtis 48V 500A (MCOR) SX Controller - Cloud Electric Without it, if an operator released the throttle
This feature was critical for industrial equipment like scissor lifts or boom lifts. Without it, if an operator released the throttle on a steep incline, gravity might cause the machine to "roll back" or the hydraulic load to creep down before mechanical brakes engaged. The manual explains how to tune this "fade" so the motor actively resists gravity for a split second, preventing the vehicle from lurching backward—a vital safety nuance that transforms a simple "speed controller" into a sophisticated safety device. curtis 1520 controller manual
| Pin | Signal | Description | |-----|----------------|----------------------------------------------------| | 1 | B+ (Logic Power)| +48V (switched via keyswitch) | | 2 | B- (Logic GND) | Ground for logic circuits | | 3 | Throttle Wiper | 0-5V analog input from accelerator pedal | | 5 | Interlock | Seat switch or operator presence (must be high) | | 8 | Encoder A | Motor speed feedback (differential) | | 9 | Encoder B | Motor speed feedback | | 14 | CAN-H | CANbus high (500kbps typical) | | 15 | CAN-L | CANbus low | | 21 | Main Contactor | Coil driver output (low side) | | 28 | Status LED | Blink code output for diagnostics |
Always install a properly rated main fuse in the B+ line.
Before installing, users should perform resistance checks on motor windings and solenoids to avoid voiding the warranty. Curtis 48V 500A (MCOR) SX Controller - Cloud Electric
This feature was critical for industrial equipment like scissor lifts or boom lifts. Without it, if an operator released the throttle on a steep incline, gravity might cause the machine to "roll back" or the hydraulic load to creep down before mechanical brakes engaged. The manual explains how to tune this "fade" so the motor actively resists gravity for a split second, preventing the vehicle from lurching backward—a vital safety nuance that transforms a simple "speed controller" into a sophisticated safety device.