Software - Motorola Gm160 Programming

belongs to the Motorola Professional Series. To program it, you specifically need the Professional Radio Customer Programming Software (CPS) Compatibility: While modern radios use MOTOTRBO CPS, older units like the typically require the

: Most connection failures are due to the software looking at the wrong COM port in settings. motorola gm160 programming software

Connect the programming cable to your PC’s USB or serial port. Plug the RJ45 end into the GM160’s microphone port. Power on the radio. : belongs to the Motorola Professional Series

Remember that the GM160 is a commercial radio. If you are a ham, you are generally fine to modify it for the 70cm band (430-440 MHz) depending on your region. However, do not transmit on frequencies you aren't licensed for (like marine VHF or public safety bands). The FCC (or your local regulator) does not smile upon that. Plug the RJ45 end into the GM160’s microphone port